My Escape 2 & My Truck Software Improvement Update

If you experience slow performance or issues during navigation on your My Escape 2 or My Truck. Please follow the instructions below to fix the issue.

Installing SmartST Update V7.60.0028

You will need to download and install the latest SmartST update to your My Escape 2 or My Truck.

1. Connect your Navman to your computer with the USB cable
2. Turn your Navman on. Please ensure you have an active internet connection.
3. Download the Smart ST update for My Escape 2 & My Truck from the link below and save the file to your desktop.

Click Here for Smart ST Update

4. Open the file on your desktop by double clicking on it
5. Once prompted, please select "Run"
6. Select "English" from the drop down list if prompted.
7. Select "OK"
8. Accept the Terms and Conditions
9. Once the installation is completed, please select "Finish"
10. Hold down the power button on the device until the screen turns off.
11. Disconnect USB cable
12. Turn on device as per normal

Installing R05 Image Update

Once you have installed the latest Smart ST Update, you will need to download and run the R05 Image update.

1. Connect your Navman to your computer with the USB cable
2. Turn your Navman on. Please ensure you have an active internet connection.
3. Download the R05 Image Update for My Escape 2 & My Truck from the link below and save the file to your desktop.

Click Here for R05 Image Update

4. Unzip the downloaded file and save to your desktop. There should be 4 files in total.



5. Copy all 4 of the unzipped files of the Image Update onto the main directory of the device (My Computer > Mass Storage Drive - Navman Model Number, can also be named as PND).

6. Disconnect USB cable from device.
7. Reboot device and Image Update will automatically begin and will display a blue screen
8. After Image Update is successful, the device will reboot to enter into Navigation software automatically.
9. If not, Hold down the power button on the device until the screen turns off and hold down power button again to turn on the device.

Confirming R05 Image Update was Successful

Upon restart, it should display ORCA.STF.05.0402
which indicates the R05 Image update was installed successfully as shown below.




If you experience any issues during the SmartST installation or Image Update process, please note down any error messages and contact our Customer Support team on the available methods here.





Need further Information ?

If the above answer did not give you the answer you were looking for, or you need further information please complete the box below and we will answer your question personally.

Name
Email
Query
Copyright © 2017 MiTAC Intl.